How to clean the overall staircase? Purchase knowledge of overall stairs Purchase knowledge of overall stairs First, observe from the details, details determine the quality. First look at the paint surface. It must be full and delicate, with a luster...
Purchase knowledge of overall stairs
First, observe from the details, details determine the quality.
First look at the paint surface. It must be full and delicate, with a luster and luster. Moreover, stairs are different from other wood products. Stairs must be frequently stepped on, so the paint must be wear-resistant. At present, the one with the highest hardness among paints is UV paint, which has the best wear resistance, and it does not contain benzene, which is very environmentally friendly. Moreover, because UV paint is instantly cured by ultraviolet rays, it is not afraid of sunlight and has strong yellowing and deformation resistance.
Second, safe and practical.
First of all, see if the stairs have cement foundations. If you have cement foundations, just use handrail columns and pedals. If you don’t have cement foundations, you need to use a bracket. The brackets are divided into wooden structures and steel and wood structures. Generally, straight ladders are made of wooden structures, and arc ladders are made of larger and wider stairs are made of steel and wood. Steel and wood are usually combined with steel and wood. The combination of steel and wood generally contains steel plates, so that safety is guaranteed.
The connection between columns and pedals, columns and handrails, and the connection between each handrail, the connection between the stairs and the ground, the stairs and the walls are very important. It is directly related to the safety factor of the stairs. Only by choosing the safety of the stairs with a firm connection of metal parts can it be guaranteed. Maintenance of the overall staircase
1. After the staircase is installed, check the overall installation status. Only after the staircase installation standard can it be used.
2. When cleaning the steel parts of the staircase, please wipe it with a dry soft rag and do not rinse it with water.
3. When cleaning stairs, please use a vacuum cleaner or wrung rag to remove dust, and do not rinse with water.
4. If you accidentally sprinkle water on the stairs, wipe it dry in time.
5. If there are special stains on the step, please wipe it with soft neutral cleaning and warm water. Do not use steel wiping balls, acid and strong alkali to clean it.
6. Do not use sandpaper to polish the surface of the stairs.
7. When moving items upstairs, be careful to prevent the surface of the hardware object from scratching the surface of the stairs.
8. It is recommended to place a foot pad at the entrance of the stairs to reduce the wear of sand and soil on the steps.
9. Methods to remove stains on the surface of stairs:
A, asphalt, rubber, oil, chocolate, shoe polish, etc., can be cleaned with gasoline, liquor or the same solvent.
B, chalk, crayon, and lipstick, can be cleaned with alcohol.
C, wax, chewing gum, we can wrap a piece of plastic film and put it on the stain, and then scrape it off carefully.
Whether it is wooden stairs, steel stairs, iron stairs, etc., you must pay attention to moisture, fire and collision protection during use.
1. When wooden stairs get damp, wooden components are prone to deformity, cracking, and paint will fall off. Metal stairs also have wooden components, and the metal will rust when it is damp, so you should not use a lot of water to clean the stairs on a daily basis. You can spray the surface of the detergent and wipe it with a soft cloth.
2. The steps and handrails that often come into contact with people have a shorter lifespan than other components, so special wax or floor wax should be used regularly to protect them. In addition, although the paint surface on some step boards is light-cured wear-resistant paint, wear resistance is relatively relevant and has a certain service life in itself. To avoid local severe wear and tear on the wooden tread board after use for a period of time, a carpet can be laid on the center of the stair corridor. The brightness is chosen by the owner himself, or you can consult a professional designer. This not only serves to protect the stairs, but also can decorate the entire space to some extent.
3. Check the connection parts of each component frequently to prevent loosening or being worm-eaten. Because when stairs are installed, although engineers have tightly connected them, various components are undergoing subtle physical changes as the temperature and humidity continue to change. Wooden stairs or components made of metal or other materials are usually damaged by collapse, wear, insect damage or fungal invasion, which can be repaired by professionals. But what is more important is early maintenance. Proper maintenance can greatly extend the service life of the stairs.
5. If you accidentally soak in water, you should dry it as soon as possible after discovering it and let it dry naturally. It is strictly forbidden to use an electric heater to dry or expose it to the sun.
6. Long-term exposure to strong sunlight, or sharp rise and fall in the room, may cause the premature aging of the paint surface of the stepping board, and should be avoided as much as possible.
Cleaning of the overall stairs
1. Clean one side of the stairs from the rooftop, and clean the sand and soil in each corner of the stairs with small cleaning.
2. Drag the stairs and steps every day to keep the ground free of obvious dust.
3. Use chicken feathers to sweep the long handles to remove spider webs from high corners of the corridor once a week; remove spider webs once a day; remove lights and exit cards.
