The temperature is 30 degrees high in summer. The first thing many people do when they get home is to close the windows and open the air, but is this the right step? According to the report of Popular Science China, the correct step should be to ope...
The temperature is 30 degrees high in summer. The first thing many people do when they get home is to close the windows and open the air, but is this the right step?
According to the report of "Popular Science China", the correct step should be to open the air cooler for 5 to 10 minutes to ensure that the dirt on the air cooler is discharged from the outdoors, and then close the doors to reduce the harmful gases inside the room. Moreover, opening the window to open the air can relieve the body, allowing the body to adjust the appropriate temperature.
{91. First turn on high power > medium and low power
is set to high power when starting to turn on, so that the room temperature quickly approaches the default temperature and achieves a temperature reduction effect. After the temperature is moderate, switch to medium and low power to reduce energy consumption.
2. The wind vent faces up
Since the cold air is denser than the hot air, the hot air is on the upper and the cold air is on the lower. Putting the wind vent faces up will cause the cold air to sink and quickly reduce the indoor temperature.
3. The temperature difference between indoor and outdoor at 26 degrees Celsius should not be too large, generally 8 to 10 degrees, and the indoor is set to 26 degrees, so that the human body feels most comfortable.
4. If you go out for a short time, you don’t need to turn off the air conditioner. The start of the air conditioner will generate a high voltage of 500 to 1,000 watts, which will be frequently turned on, which will consume more electricity when starting.
5. The time before going to bed can be 2 to 3 hours at night. If you are really afraid of heat and need to blow the whole night, you can adjust the mode to "sleep", which can save 20% of the electricity.
6. Dehumidification is more power-saving
The "Dehumidification" mode is more power-saving than "cooling". In the dehumidification mode, the indoor blower maintains low speed operation, and the pressure compressor is operated at a standstill, allowing the indoor to maintain a set temperature near the set temperature; while in the cooling mode, the pressure compressor and blower will continue to operate until the indoor temperature reaches a low temperature before the machine is shut down.
1. Open the windows for 3 hours to open the windows for wind
It is recommended to open the windows every 3 hours to vent the dirty and harmful gases.
2. The cold air is cleaned regularly for a long time and is not cold, which will accumulate a lot of dust, harmful bacteria and foul slugs. It is recommended to clean it once a month.
3. Water released in the cold air room
Cold air will cause the liquid to evaporate rapidly and reduce, and will also take away the moisture in the skin and respiratory tract. Putting a basin of water can reduce the evaporation of water, which has a safeguarding effect.
4. Drink more hot water
Drink more hot water in the cold room, which can promote blood circulation and body sweating, and avoid cold diseases.
5. Disinfect with vinegar. Vinegar has antibacterial effects. You can mix two spoons of vinegar and a bottle of water, put it in a spray bottle, and spray it in a cold room, which can kill bacteria in the air.
