Taiwan is one of the countries with the highest motor and motor density in the world. Hard helmets are a necessary safety protection product for every rider. Wang Huilong, director of the Tainan Branch of the Standard Inspection Bureau of the Minist...
Taiwan is one of the countries with the highest motor and motor density in the world. Hard helmets are a necessary safety protection product for every rider. Wang Huilong, director of the Tainan Branch of the Standard Inspection Bureau of the Ministry of Economic Affairs, said that there are 9 tips for choosing safety. One of the conditions for qualified hard helmets is that through national standard CNS testing, it can effectively absorb impact energy when hit, and avoid greater damage to the rider's head.
Wang Yinglong also said that the safety helmet protective lens can prevent piercing and heads from being pierced and damaged by sharp objects. If the protective lens strength test fails, the lens may easily break and scratch the skin on the face when hit. Unqualified transparency means that the protective lens is likely to affect the safety of the driving due to poor visual lines.
{9
2. Motor and vehicle safety helmets are divided into two types according to their purpose: ordinary type (non-elephony car with less than 125cc) and enhanced type (non-elephony car with more than 125cc). Please choose safety helmets that are suitable for their own purpose and the shape and size of their heads. And you cannot feel too heavy after wearing them, and you cannot feel pressured at any point in the head.
3. Do not wear helmets for activities such as bicycles, ice skates, skates and straight-row wheels or industrial protective helmets as safety helmets for motor vehicles.
4. When choosing and purchasing, consider new products, with bright appearance and clear colors, clean interior and no odor. There should be no damage, sluggishness or changes. Please note that you should not put a cup on the belt.
5. When wearing a car safety helmet, the belt should be firmly touched through the bottom of the joint, and be firmly worn on the head, so as not to shake up the upper, lower, left and right, and do not obstruct the wire.
6. Do not disassemble or modify the hats for motor vehicles.
7. If the safety helmet has been hit hard, it should be replaced immediately even if the outside world cannot see its injury.
8. When protecting the lens, check whether there is any damage, and the lens should be kept clear.
9. There should be no sharp corners or concave convex areas on the protective lens to avoid the risk of being cut or damaged by wearers.
Consumers can directly enter the product inspection code to check the product's verification information, including whether it is a qualified product and other detailed information, etc.
Editor Recommendation
When the foot was touched, it hurt so much that it cried? Expert tutors can improve plantar fasciitis with coughing, should I spit out if I have phlegm? Doctor: It can be swallowed unless these two situations
